As a stand-alone microplate reader, the DAR800 is designed for applications within the clinical, biotechnology and research areas. The onboard data reduction surpasses many computer software packages with its extensive curve-fitting, cutoff calculation, data transformation and validation capabilities. The DAR800 interfaces with Diagnostic Automation Data Analysis Software for even more flexibility in data analysis and reporting.

DAW50 Microplate Washer

As a stand-alone microplate reader, the DAW50 is designed for applications within the clinical, biotechnology and research areas. The onboard data reduction surpasses many computer software packages with its extensive curve-fitting, cutoff calculation, data transformation and validation capabilities. The DAW50 interfaces with Diagnostic Automation Data Analysis Software for even more flexibility in data analysis and reporting.

Microplate Luminometer

The MPL1 Microplate Luminometer is an affordable but high quality instrument with basic functionality. It incorporates all important functions necessary to perform glow luminescence measurements and it is suitable for all applications which require a very high dynamic range, but not extremely high sensitivity. Due to the concentration on the few critical functionalities, the instrument is available for a very attractive price. CE certified.

Stat Fax® 2100 Microplate Reader

The Stat Fax 2100 Microplate Reader is fully automatic. , Bichromatic optics. Standard model includes four filters; six filters are available for a nominal charge. On board data reduction calculations include regressions, curve fitting and cutoff absorbance calculations with step-by-step user prompting. Large, non-volatile memory stores at least 50 user tests. Includes parallel and serial outputs. Operates with or without a computer. A bi-directional accessory is available for linking to IBM compatible computer. NRTL and CE certified.

Stat Fax® 2200 Incubator - Shaker

Holds two 96 well microplates. Digitally controlled 8-speed shaker with orbital mixing from 575 to 1500 rpm. Temperature adjustable from ambient to 40 °C with resolution of 0.1 °C. Digital timer controls shaking or can be operated independently as a timer. Compact and easy to operate. Outer tinted cover provides further insulation and protection from light. NRTL and CE certified.

Stat Fax® 2600 Automated Plate Washer

Fully automatic,Washes flat, round, V-bottom plates and strips. No user djustments required. Automatic calibration, alignment, and last row detection. , Large, non-volatile memory stores at least 50 user wash protocols, Precision operation with constant monitoring of vacuum and pressure. Pump cycles only when necessary for quiet operation. Programmable automatic rinse cycle. -Ready to run: bottles, aerosol shield, 8-way manifold included. -12 and 16 position wash heads available as accessories. -NRTL and CE certified

Stat Fax 4700 Microstrip Reader

The Stat Fax 4700 Microstrip Reader, PHOTOMETRIC
Linear Measurement Range: 0.0 to 3.0 Absorbance units (A).
Photometric Accuracy: 0.0 – 1.0A +/- (1% of the reading + 0.010A).
>1.0A +/- (2% of the reading + 0.010A).
Stability: Drift of no more than 0.005A in 8 hours/bichromatic.
Light Source: Tungsten-Xenon lamp with lamp saver feature.
Standard Wavelengths: Standard: 405, 450, 492, and 630nm.
6-VIS: 405, 450, 492, 545, 600, and 630nm.
6-UV: 340, 405, 450, 492, 545, and 630nm.
Alternate filters available from 340 to 880nm.
Filter Type: IAD hardcoat interference, 10nm half bandpass.
Vessel: Single or break-apart strip up to 12 wells long.
3-strip loading capacity.

Stat Fax ® 4200 Microplate Reader

The Stat Fax 4200 is a compact, standalone 8- channel microplate reader. It‘s streamlined designed offers touch screen interface, rapid reading, superb optics, onboard curve-fitting software, and built-in printer to meet the requirements of modern laboratories.

Linear Measurement Range: 0.0 to 4.0 Absorbance units (A).
Photometric Accuracy: +/- 1%.
Stability: Drift of more than 0.005 A in 8 hours.
Light Source: Remove halogen lamp source with lamp
saver feature.
Wavelengths: Standard: 405,450,492 and 630 nm.
Filter options from 405nm to 700nm.
Filter Type: IAD hardcoat interference, 10nm half
bandpass .
Vessel: Standard 96-well microtiter plates, or
Strip trays.

The Stat Fax 4500 is a compact, standalone chemistry analyzer. Its streamlined designed offers touch screen interface, rapid reading, superb optics, onboard curve-fitting software and built-in printer to meet the requirements of modern laboratories. CE Certified

Linear Measurement Range: Tube or Cuvette -0.0 to 3.0
Absorbance units (A).
Photometric Accuracy: +/- (1% of the reading + 0.005A).
Stability: Drift of no more than 0.005A in 8 hours/bichromatic.
Light Source: Tungsten lamp with lamp saver feature.
Standard Wavelengths: 340,405,505,545,580 and 630 nm.
(alternate filters available from 340 to 700nm.
Filter Type: IAD hardcoat interference, 10nm half bandpass
Tube Size: 12mn round tube is standard.
Read cell accommodates square cuvettes.
Minimum sample volume: 1 mL for 12mm round tube.
250 µL for flowcell.

Stat Fax � 3300 Chemistry Analyzer shown with 3600 Incubation Block and optional keyboard

Flip-up display screen.
Large 240 x 128 pixel graphical display.
Plug in standard external keyboard for easier data entry (sold separately).
Use 40-column on-board thermal printer, external printer, or PC.
Create a work list, run tests, print patient reports. Stores patient data.
Shows kinetic plots in real time.
Stores control values and creates Levey-Jennings plots for QC.
Optical system is temperature controlled to 37C.
Bichromatic w/ 6 filters and spaces for 2 optional filters (340-700nm).
Adapts to use 12 mm round tubes, 1 cm square cuvettes, or built in flow cell.
Vacuum system speeds sampling and reduces carryover.
Calibration traceable to NIST standard.
Stat Fax�� readers use IAD filters.
3600 Incubation Block

Optional Accessory for the Stat Fax�� 3300
Incubates 18 Tubes at 37��C.
LED at front indicates heating function.
Temperature displays on 3300 screen.

LumiStat Microstrip Luminometer

Automatic strip transportation.
3-strip loading capacity for 8-well or 12-well strips.
Easy to use with step-by-step prompting and on-board graphics printer.
On-board software calculates RLU's, multi-point calibration, and regression curves.
Large non-volatile memory stores more than 100 user-entered tests.
The increased range and sensitivity of CLIA (Chemi Luminescent Immuno Assays) is no longer just for high volume labs. LumiStatTM, the first CLIA micro strip reader, brings this technology to any size lab. LumiStatTM reads break-apart wells up to 12 wells per strip, and calculates results instantly and automatically. LumiStatTM is an open system, allowing users to program a wide variety of glow-type CLIAs. Test names and parameters are stored in a large on-board memory for easy recall.

Simply select an assay from the stored menu, load the strips, and close the door. LumiStatTM automatically blanks and advances the strip well by well, precisely measuring and reporting the light output from each. LumiStatTM runs hormones and many other applications with on-board calculations for point-to point, linear and log regressions, and log logit modes. A built-in reference assures continuous calibration.

NRTL and CE certified.

Test parameters: Glucose, Urobilinogen, Bilirubin, Ketone, Specific Gravity, Blood, pH, Protein, Nitrate and Leucocytes.
Test principle: Dual wavelength with cold light source reflection
Wavelength: 550nm, 620nm, and 720nm
Type of Urine Strip: All URS Strip type formats
Throughput: 720 test/ hour Speed: 5 sec/ strip
Printing format: Thermal Printer
External printer: Parallel Port
Display screen: LCD 320mm x 240mm, Touch Screen functionality.

Test parameters: Glucose, Urobilinogen, Bilirubin, Ketone, Specific Gravity, Blood, pH, Protein, Nitrate and Leucocytes.
Test principle: Dual wavelength with cold light source reflection
Wavelength: 550nm, 620nm, and 720nm
Type of Urine Strip: All URS Strip type formats
Throughput: 720 test/ hour Speed: 5 sec/ strip
Printing format: Thermal Printer
External printer: Parallel Port
Display screen: LCD 320mm x 240mm, Touch Screen functionality.

The CD101 analyzer is a portable, bench top analyzer for reading the manufacturer urine reagent strips. Training for this instrument is not required or necessary. Multiple urine strip types can be used with this analyzer specifically for the URS-2P-CD, URS-4S, URS-5K, URS-6, URS-7, URS-8, URS-9, URS-10.
Test Principle: Super-high cold light source reflecting
Test Parameters: Glucose, Urobilinogen, Bilirubin, Ketone, Specific
Gravity, Blood, PH, Protein, Nitrate and Leucocytes
Throughput: 60 tests / hr.
Testing time: 60 seconds
Printing Format: Thermal Printer
Display Screen: LCD
Memory Capability: 1000 Test Results
Interface: ASCII (RS232)
Dimensions: 210mm x 151 mm x 113 mm
Weight: 2 Kilograms
Power source: AC 220V ,50Hz; AC 110V, 60Hz
Patient ID Capable, LIS Capable